3-Stage Whole House Water Filtration System with Iron and Manganese Reducing Filter and 3/4 in. Push-Fit Hose Connectors


The WGB32BM whole house water filter system is an ideal “point of entry” filtration system for cleaning up well water. Unlike “point of use” systems that are installed to supply water to a specific faucet, the WGB32BM whole house water filtration system filters your water from the source. This means water from every output in your home will have passed through the three filtration stages of the WGB32BM. The stage 1 housing holds a 5-micron high-capacity polypropylene sediment filter. This filter removes dirt and other various larger sized particles from the water that can clog the following filters. The second stage of the WGB32BM whole house water filter houses a 5-micron CTO coconut shell carbon block filter. Block carbon is more effective than other forms of carbon in that it is finely ground carbon packed into a solidified block. This means it has a higher density than other types of carbon filters and is therefore more effective in removing targeted contaminants. The carbon block filter knocks out bad tastes and odors, removes up to 99% of chlorine from the water, and is highly effective on industrial chemicals. The third stage of the WGB32BM has an iron and manganese reducing filter. The FM25B iron and manganese reducing filter is only included with the WGB32BM whole house water filter system, as it is not needed for most municipal water supplies that the WGB32B whole house water filter targets.



  • Protect your family and household appliances from iron, manganese, and more with iSpring WGB32BM whole-house water filter system
    Our third stage whole house water filter (FM25B) is specially designed for iron and manganese removal, reducing iron (MAX 3.0 ppm down to 0.01 ppm) and manganese (MAX 1.0 ppm down to 0.01 ppm). It lasts up to 3 times longer than greensand due to the catalytic media not being consumed in the process
  • WGB32BM whole house water filtration system also removes sediment, chlorine, rust, herbicides, industrial solvents, bad tastes and odors, and various other contaminants
  • WGB32BM’s whole house water filter system is installed at the main water supply line in order to treat all the water in your home. The two included push-connect hoses make installation easier and leak-free
  • DIY installation and maintenance: Refer to our manual and our helpful YouTube videos for easy DIY installation. With 1″ NPT inlet/outlet and 20″ x 4.5″ filter cartridges, this whole house water filter system has minimal impact on water flow (up to 15 GPM) and requires minimal maintenance
  • Top-notch quality: The first-stage high-capacity polypropylene sediment filter is able to achieve filtration down to 5 microns; the second-stage CTO carbon block filter is made of high-quality coconut shell carbon for maximum filtration efficiency and filter life. Both are tested by an independent third party to meet NSF/ANSI standards. Both whole-house water filters have a capacity of 100,000 gal. of water, enough to supply a family of four with clean water for a full year
  • The whole house water filter cartridges are individually wrapped to ensure freshness; please unwrap the cartridges before use”


There are no reviews yet.

Be the first to review “3-Stage Whole House Water Filtration System with Iron and Manganese Reducing Filter and 3/4 in. Push-Fit Hose Connectors”

Your email address will not be published. Required fields are marked *